Online Store 
Switches SW-795 3-Way Manual Frog Switch, No Curve
Switches SW-795 3-Way Manual Frog Switch, No Curve
Print
 View Full-Size Image |
SW-795 3-Way Manual Frog Switch, No Curve |
|
| Price: Call for Pricing | ||
| Ask a question about this product | ||
The SW-795 Three-Way Manual Frog Switch is used on Safe-Rail manual push systems where it is necessary to switch the center track between three conveyor lines. The SW-795 Three-Way Frog Switch is similar in design to the Two-Way Universal Frog Switch but had two movable frog plates that can be switched between three positions in the track. The position of the frog plates is controlled by two chains attached to the frog plates through a pulley system. Pulling one chain shifts the switch to the left hand position; pulling the other chain shifts the switch to the right hand position. Pulling both chains shifts the switch to the center position. The throw control is included with the switch and extends 2'-0" from the centerline of the main track. Switch is finished with a powder coating finish. |
||
|
|
||
Recently Viewed Products
- CU-2843 Inverted Horizontal Curve, 2'-0"R X 90D, Hardened (Category: Inverted Components)
- CA-561 Load Bar, 16.375" Long, (Pattern # 01922) (Category: Replacement Parts - Conveyor)
- TWT-2012-GA Traction Wheel Turn, 2'-0" Diameter (Category: Traction Wheel Turns)
- TR-705 Carrier Insert Section Assembly (Category: Track Accessories)
- CA-1718 Four-Wheel Carrier, 250 Lb. Capacity, S-Yoke (Category: Carriers)