The 077008 Clevis Pin is used in many of the Safe-Rail Carrier assemblies to provide a flexible and removable fastener between the load bar and the wheel assembly. 
Product Details...

The CA-1209 Guide Roller is used on the CA-1710 Two Wheel Carrier Assembly on many of the Safe-Rail and Twin-Trak Carrier Assemblies. The guide roller contacts the inside lips of the conveyor track to allow the carrier to move smoothly through the straigh 
Product Details...

The CA-123 Bearing Race, two per bearing, are used with the CA-124 Needle Thrust Bearing and the CA-1710 Two Wheel Carrier in many of the Safe-Rail Carrier Assemblies to provide a flexible and rotating bearing surface between the load bar and the wheel as 
Product Details...

The CA-124 Needle Thrust Bearing is used with two of the CA-123 Bearing Race and the CA-1710 Two Wheel Carrier in many of the Safe-Rail Carrier Assemblies to provide a flexible and rotating bearing surface between the load bar and the wheel assembly. 
Product Details...

The CA-1774 Guide Roller Pin is used as an axle for the CA-1209 Guide Roller on the CA-1710 Two Wheel Carrier Assembly. 
Product Details...

The CA-237 Load Bar is used on the CA-240 Safe-Rail Carrier Assembly to increase the rated load capacity and equally spread the load to the wheel assemblies. 
Product Details...

The CA-238 Pendant is used on the CA-236 and CA-240 Safe-Rail Carrier Assemblies to provide a flexible attachment between the load bars to equalize and spread the load weight to the wheel assemblies. 
Product Details...

 
Product Details...

The CA-243 Eye Bolt is used on the CA-234, CA-236 and CA-240 Safe-Rail Carrier Assemblies to provide an easily accessible point for hanging the load. 
Product Details...

The CA-560 Pusher Arm is used on the CA-569 and CA-570 Twin-Trak Carrier Assemblies to provide a place on the carrier that can be engaged by a pusher dog on the power chain to move the carrier on the load track. 
Product Details...

The CA-561 Load Bar is used on the CA-569 Twin-Trak Carrier Assembly to connect the wheel assemblies for an increased load capacity and to equally spread the load to the wheel assemblies. 
Product Details...

The CA-562 Load Bar is used on the CA-570 Twin-Trak Carrier Assembly to connect the wheel assemblies for an increased load capacity and to equally spread the load to the wheel assemblies. This load bar is also used on the CA-234, CA-236, and CA-240 Safe- 
Product Details...

The PE-625 Drive Lug is used on the PE-1155 Pusher Dog Assembly. The drive lug is the part that contacts the carrier arm to move the carrier through the load track. 
Product Details...

The PE-1154 Connecting Bar Assembly is a sub-assembly used on the PE-1155 Pusher Dog Assembly. The only components not included on the sub-assembly are the pendants, slotted hex nuts, and cotter pins. 
Product Details...

The PE-1156 Connecting Bar is used on the PE-1155 Pusher Dog Assembly. The connecting bar is the main body of the pusher dog assembly as the drive lugs and pendants are fastened to the connecting bar. 
Product Details...

The PE-1955 Pusher Dog Pendant is used on the PE-1155 Pusher Dog Assembly. 
Product Details...