The 096870 #50 Roller Chain is used on the 2035.01371 and 2035.01372 Drive Units to transfer power from the drive sprocket to the CAT chain sprocket. 
Product Details...

The 097952 Square Key is used to secure the DR-2535 Sprocket to the idler or drive shafts on the Drive Units. 
Product Details...

The 098280 Connecting Link for #50 Roller Chain is used with the DR-1371 and DR-1372 Drive Units as the master link for connecting the ends of the #50 drive chain. 
Product Details...

The 098300 Offset Connecting Link (Half Master Link) for #50 Roller Chain is occasionally required on SPECIAL Drive Unit applications where the total length of the #50 drive chain is not a standard length. 
Product Details...

The DR-1017 CAT Chain Connecting Kit is designed for use when refurbishing a DR-2536 CAT Chain. The DR-1017 CAT Chain Connecting Kit contains the following parts: 28 each of the Connecting Link, 28 each of the Spring Clip, 28 each of the Side Bar Outside 
Product Details...

The DR-1279 Drive Track Lip is a rectangular steel section bolted to the drive frame. It acts as a removable track lip on the drive unit to provide a surface for the conveyor chain to roll on as the CAT drive chain pulls the conveyor chain through the the 
Product Details...

The DR-1280 Drive Frame Cover is an "L" shaped steel section bolted to the drive frame. It acts as the side of the conveyor track to provide a surface to guide the conveyor chain through the drive unit as the CAT drive chain pulls the conveyor chain throu 
Product Details...

The DR-1281 Back-Up Bar is a fabricated steel section bolted to the drive frame. It can be adjusted to help the CAT chain to properly engage the conveyor chain. 
Product Details...

The DR-1286 Pillow Block Bearing is used on the DR-1371 and DR-1372 Drive Units as the bearing supports for the idler and drive shafts. 
Product Details...

The DR-1293 CAT Chain Drive Dog Assembly is designed for use when refurbishing a DR-2536 CAT Chain. 
Product Details...

The DR-1302 Drive Cover acts as a removable protective shroud over the CAT chain and sprockets. 
Product Details...

The DR-1380 Drive Speed Reducer (Gear Box) is part of the power drive train used on the DR-1371 Drive Units. The speed reducer provides the drive speed gear reduction from the motor to the drive torque limiter (clutch assembly) to create the desired oper 
Product Details...

The DR-1381 Drive Speed Reducer (Gear Box) is part of the power drive train used on the DR-1372 Drive Unit. The speed reducer provides the drive speed gear reduction from the motor to the drive torque limiter (clutch assembly) to create the desired opera 
Product Details...

The DR-1382 Drive Torque Limiter (Clutch Assembly) is part of the power drive train used on the DR-1371 Drive Unit. The torque limiter acts as a safety mechanism as it will slip when the torque exceeds the preset limit to prevent damage to the drive trai 
Product Details...

The DR-1383 Drive Torque Limiter (Clutch Assembly) is part of the power drive train used on the DR-1372 Drive Unit. The torque limiter acts as a safety mechanism as it will slip when the torque exceeds the preset limit to prevent damage to the drive trai 
Product Details...

The DR-1384 Driven Sprocket is the main drive sprocket used on the DR-1371 and DR-1372 Drive Units. The driven sprocket is rotated by the #50 chain that connects to the clutch sprocket. The driven sprocket rotates the drive shaft which moves the CAT chai 
Product Details...

The DR-1390 Friction Liners (Replacement Clutch Discs) are the direct replacement parts for the existing friction discs in the torque limiters (clutch assemblies) used on the DR-1371 and DR-1372 Drive Units. 
Product Details...

The DR-1418 Sprocket Cover provides a removable protective shroud over the clutch sprocket, the #50 drive chain, and the 72 tooth driven sprocket. 
Product Details...

The DR-2533 Idler Shaft is used on the DR-1371 and DR-1372 Drive Units. The idler shaft is supported between 2 pillow block bearings. The idler shaft holds the CAT chain sprocket at the idler end of the drive unit. 
Product Details...

The DR-2534 Drive Shaft is used on the DR-1371 and DR-1372 Drive Units. The drive shaft is supported between 2 pillow block bearings. The drive shaft holds one of the CAT chain sprockets and the 72 tooth driven sprocket at the motor end of the drive unit 
Product Details...

The DR-2535 CAT Chain Sprocket is used (2 each) on the DR-1371 and DR-1372 Drive Units. One sprocket is fastened to the drive shaft and the other is fastened to the idler shaft to provide support and allow rotation of the drive CAT chain. The CAT chain  
Product Details...

The DR-2536 Drive CAT Chain is used on the DR-1371 and DR-1372 Drive Units. 
Product Details...

The DR-2537 CAT Chain Inside Roller Assembly is designed for use when refurbishing a DR-2536 CAT Chain. 
Product Details...

The DR-2580.001 Drive Motor (3/4 HP) is used on the DR-1371 Drive Units. The motor provides the power to the drive unit to move the conveyor chain through the system. 
Product Details...

The DR-2580.002 Drive Motor (1-1/2 HP) is used on the DR-1372 Drive Units. The motor provides the power to the drive unit to move the conveyor chain through the system. 
Product Details...